Data: device types

From Yombo
Jump to: navigation, search

Runtime Reference:
Device Types

Learn more about runtime reference types.

Name Label Description
android_ipcam Android IP Webcam Implements support for using the mobile app 'IP Webcam' on Android available at: https://play.google.com/store/apps/details?id=com.pas.webcam

After adding this device, enter the configuration details available from within the application.

android_phone Android Phone An android based mobile phone.
apple_phone Apple Phone An Apple (IOS) based mobile phone.
binary_sensor Binary Sensor A sensor that is either on/off (high/low).
device_to_file Device To File Used by the device to file module for development and testing.
digital_input_port Digital Input Port A digital input port is typically used as sensors and typically report 'high' when a circuit is closed and 'low' when it's open (a switch might be in the off position).
digital_output_port Digital Output Port A digital output port acts like like a relay and can only be open or closed.
fax_phone Fax Phone A phone dedicated for faxing.
garage_door Garage Door A garage door, or a device that can act like a garage door. See also: Gate.
hv_input_port Homevision Input Port A homevision input put.
hv_output_port Homevision Output Port A homevision output put.
insteon_appliance Insteon Appliance An Insteon appliance module or device.
insteon_lamp Insteon Lamp An Insteon lamp module or device.
jabber Jabber A jabber account.
jinvoo_switch Jinvoo Switch A switch that was initially setup using the Jinvoo Apple / Android app.
mobile_phone Mobile Phone A mobile (cell) phone. Can usually send and receive text messages.
motion_sensor Motion Sensor Motion sensor is built on top of a binary sensory.
nest_thermostat NEST Thermostat A NEST thermostat.
noise_sensor Noise Sensor Built on top of the binary sensory, used for tracking if noise is detected.
onewire_ds1822 1Wire DS1822 Low Precision Thermometer The DS1822 digital thermometer provides 9- to 12-bit centigrade temperature measurements. Each DS1822 has a unique 64-bit serial code, which allows multiple DS1822s to function on the 1-Wire bus. It has an operating temperature range of 55°C to +125°C and is accurate to

+-2.0°C over the range of 10°C to +85°C.

onewire_ds1825 1Wire DS1825 High Precision Thermometer The DS1825 digital thermometer provides 9 to 12-bit centigrade temperature measurements. The DS1825 communicates over a 1-Wire bus

that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to +-0.5C over the range of -10°C to +85°C.

onewire_ds18b20 1Wire DS18B20 Thermometer The DS18S20 digital thermometer provides 9-bit Celsius temperature measurements. Each DS18S20 has a unique 64-bit serial code, which allows multiple DS18S20s to function on the same 1-Wire bus. Maximize System Accuracy in Broad Range of Thermal Management Applications

Measures Temperatures from -55°C to +125°C (-67°F to +257°F), ±0.5°C Accuracy from -10°C to +85°C.

onewire_ds18s20 1Wire DS18S20 Thermometer The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements. Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Measures Temperatures from -55°C to +125°C (-67°F to +257°F), +-0.5°C Accuracy from -10°C to +85°C.
onewire_ds28ea00 1Wire DS28EA00 High Precision Thermometer The DS28EA00 is a digital thermometer with 9-bit (0.5°C) to 12-bit (1/16°C) resolution. The operating range is -40°C to +85°C.
opening_gate Gate A gate, typically driveway or some other device that requires a sensor for status and a relay for control. Similar to a garage door. Typically has an input sensor for open/closed status, and an output relay to pulse to activate a gate motor.
phone Phone A basic phone, not to be confused with a mobile (cell) phone. Usually can't receive SMS/MMS.
piface_digital_input PiFace Digital Input A digital input port on a PiFace Digital (1 or 2) device.
piface_digital_output PiFace Digital Output A digital output port on a PiFace Digital (1 or 2) device.
raspberry_gpio_in Raspberry GPIO In Use a Raspberry GPIO pin for simple input operations.
raspberry_gpio_out Raspberry GPIO Out Use a Raspberry GPIO pin for output operations.
relay A relay A relay is like a switch. It allows low voltage control higher voltage or higher current items. Relays can be open or closed.
sensor Sensor Base (generic) sensor device. Typically not used directly and is the basis for all sensor types, such as binary sensor, motion, noise, etc.
tuya_switch TuyaSwitch A switch that was initially setup using the Tuya or Jinvoo app on Apple or Android app.
wemo_light Wemo Light Basic light switch, on and off and set brightness.
wemo_sensor Wemo Sensor Basic binary sensor, reports on and off (true/false)
wemo_switch Wemo Switch Basic wemo switch, on and off.
x10_appliance X10 Appliance An X10 appliance module or device.
x10_house X10 House Code Send an X10 housecode - A single letter A-P.
x10_lamp X10 Lamp An X10 lamp module or device.
zwave_binary_sensor Z-Wave Sensor A sensor that sends it's status using the Z-Wave protocol.
zwave_climate Z-Wave Climate A Z-Wave climate device, usually a thermostat.
zwave_colorlight Z-Wave Color Light A Z-Wave controlled light that allows for controlling the colors.
zwave_cover Z-Wave Cover A Z-Wave controlled cover, like a roller shutter.
zwave_dimmer Z-Wave Dimmer / Light A dimmable Z-Wave device. This can include wire-in and plug-in modules.
zwave_fan Z-Wave Fan A zwave fan controller that typically has 3 speed settings.
zwave_generic Z-Wave Generic Device A generic ZWave device when a specific device cannot be found.
zwave_switch Z-Wave Switch A Z-Wave switch or appliance module.

This page was last edited on 16 December 2017.